Timer Settings; Adjustment/Cleaning; Report Output; Cleaning - Canon iR5055 Series Service Manual

Mode
between-job interleaf
between-set interleaf
right wait time indication
Registration of the size of the side paper deck**
output tray paper mix**
original reading area cleaning prompt
function limit mode**
shut-down mode
reset common settings

1.2.3.2 Timer Settings

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
*Factory default.
Mode
time fine-adjust
auto sleep time
auto clear time
silent mode shift time
set weekly timer

1.2.3.3 Adjustment/Cleaning

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
*Factory default.
**Indicated when the appropriate accessory is installed.
Mode
zoom fine-adjust
center bind staple edging**
change middle bind position**
(w/ saddle finisher)
Adjustment of the creep (displacement) correction
volume
Adjustment of the folding position**
correct density
Adjustment of contrast of characters/background
Feeder cleaning
Drum cleaning
Wire cleaning

1.2.3.4 Report Output

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
*Factory default.
**Indicated when the appropriate accessory is installed.
Mode
transmit (specifications setup)**
Description
ON (paper source select) *OFF
ON (setting range between *10 and 9999; paper source select) *OFF
copier/box/other (for each, ON/*OFF)
A3/A4/A4R/B4/B5/11×17/LGL/LTR/LTRR
*ON/OFF
*ON/OFF
ON/*OFF
execute key
Do you really want to reset?: yes/no
T-1-6
Description
by +/- in 1-min increments
10 sec; *1, 2, 10, 15, 20, 30, 40, 50 min; 1 hr; 90 min; 2, 3,4 hr
0=none, 1, ..., *2, ..., 9 min (in 1-min increments)
0=none, 1*, ..., 9 min (1-min increments)
everyday from Sun to Sat (00:00 to 23:59; in 1-min increments)
T-1-7
Description
XY, independent: -1.0% to +1.0% (in 0.1%-increments), *0%
start key
size: A3, 11x17/B4/A4R, LTR, LGL
position: -2.0 mm to +2.0 mm (in -0.25-mm increments), *0 mm
Correction volume (For each type of paper): 0.00 to 2.00mm
(Interval of 0.05mm) *0.25mm
Adjustment of Z-fold position
-2mm to +1.5mm, *0mm (incremented by 0.5mm)
Adjustment of C-fold position
A: 0.0mm to 6.0mm, *0mm
B: 0.0mm to 3.0mm, *0mm (incremented by 0.5mm)
copier/box, transmit; 9 steps each (at time of shipment, set to '5')
Relative contrast value: -7 to *+7, 0
Print setting for sample printing
Setting of the standard value: 0 to 64, *20
Density of a latent image: 0 to 36, *8
Start key
Start key
Start key
T-1-8
Description
transmission result report: *only if error/ON/OFF
indicate transmission original: *ON/OFF
Chapter 1
0015-4316
0015-4317
0015-4318
1-11