Table of Contents
Advertisement
Control panel
9.7 Hiding the projection image
Closing the mechanical lens shutter blocks the projection light, and black out the screen
keeping the projection state. If you use another monitor device, you can operate the
display, hiding it from the audience.
Press the SHUTTER button (on the control panel or the remote control) to close, or open
the lens shutter.
NOTE
* While the lens shutter is closed, the SHUTTER indicator (on the control panel) blinks
yellow.
* Even if the projector is turned off with the lens shutter closed, turning the projector on
opens automatically the lens shutter.
WARNING
● Do not leave the shutter closed for a long time while using the projector, since the
closed lens shutter could raise the inside temperature, and result in even a fire.
9.8 Temporarily blanking the display
Using the BLANK button, you can display the BLANK image preset by the item BLANK
of the SCREEN menu instead of the image from the input signal.
Press the BLANK button (on the remote control), to display the BLANK image, or recover
the image from the input signal.
NOTE
* Some operation of the projector may recover the image from the input signal
automatically.
LX750/LW650/LS+700 User Manual-Concise
Cursor buttons
SHUTTER indicator
SHUTTER button
Remote control
LASER
INDICATOR
STANDBY/ON
MY SOURCE
COMPUTER
VIDEO
ID 1
ID 3
DIGITAL
ID 2
ID 4
BLANK
LASER
ENTER
FREEZE
MENU
SHUTTER
RESET
ASPECT
PbyP
AUTO
POSITION
MY BUTTON
MAGNIFY
1
3
ON
2
4
OFF
FOCUS
ZOOM
KEYSTONE
+
+
LENS SHIFT
-
-
18
BLANK button
020-000158-01 Rev. 1 (03-2009)
Advertisement
Table of Contents
