Blanking - Submenu; Image Settings Menu - Christie J Series User Manual

Section 3: Operation

3.5.9 Blanking - Submenu

This submenu consists of the following options:
• Active Input Window: This read-only value indicates the current size of your displayed data or "region of
interest" as defined by the blanking controls. By default, the projector automatically determines what portion
of its full resolution to use, and pixels in the surrounding borders are turned off. To specify a specific active
input window size by adjust one or more "Blank" settings. For example, if you have blanked (cropped) 100
pixels from both the left and right edges of an incoming source of 1400 x 1050, the remaining active input
window will be reduced to 1200 x 1050.
• Blanking (Top, Bottom, Left, And Right): Crop the image so that
unwanted edges are removed from the display (changed to black).
Blanking defines the size of the Active Input Window, or area of
interest. Range of adjustment depends on the source resolution and
other factors.
NOTE: Blanking a PIP image resembles zoom. For example, left
Blanking zooms the right side of the PIP image; Right Blanking zooms
the left side. There are no black bars.
Active Input Window 720x483
1. Top Blank
2. Bottom Blank
3. Left Blank
Right Blank
4.
3.6

Image Settings Menu

Use the Image Settings menu to alter your main
image without affecting its size or position. Changes
made are applied immediately and are saved when
you exit the menu (press E
not available for the projector model or source are
disabled and appear dim (grey).
3-22
PIP Blanking
0
0
0
0
or M
XIT ENU
). Options
PIP Blanking
Active Input Window 720x483
1. Top Blank
2. Bottom Blank
3. Left Blank
Right Blank
4.
Image Settings
1. Contrast
2. Brightness
3. Yellow Notch Filter
4. Color Space
5. Video Options
6. Input Levels
7. Advanced Image Settings
J Series 2.0, 2.4 and 3.0 kW User Manual
0
0
30
0
50.0
50.0
YPbPr(SDTV)
020-100707-03 Rev. 1 (02-2014)