Table of Contents
Advertisement
Adjusting the projected image
Adjust the projected image's height and horizontal tilt for better viewing.
Adjusting the height of the projector
The projector is equipped with elevator feet for adjusting the image height.
1. Locate the adjustable foot you want to modify on the bottom of the projector.
2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it.
3. Repeat with the remaining feet as needed.
For stacking application, the elevator feet of the upper projector must be adjusted to increase the
height of this projector to avoid the interference between two projectors. For more information
on stacking projectors, refer to
Inspire Series Installation and Setup Guide
020-001933-02 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Stacking application
on page 22.
Installation and setup
21
Advertisement
Table of Contents
