Managing Users; Creating A User; Changing A Password; Deleting A User - Christie Mirage M Series User Manual

Managing users

Creating a user

Do not use capitalization for user names or passwords. If capitalization is used for the user name or
password, it automatically converts it to lower case. User names can be a minimum of four and
maximum of 32 characters. Passwords can be a minimum of four and maximum of 128 characters.
1. Click Admin > Users.
2. Click Add User.
3. Type your username and password.
4. Re-type your password.
5. Click OK.

Changing a password

1. Click Admin > Users.
2. Select the user whose password you want to change.
3. To open the Password Change window, click Change Password.
4. In the Password field, type the new password.
5. In the Re-type Password field., re-type the password
6. Click OK.

Deleting a user

1. Select the user that you want to remove
2. Click Delete User.
3. In the confirmation dialog, click Yes.

Uploading a logo file

The projector must be powered on to enable the Upload drop-down list.
1. Click Admin > System.
2. To open the Choose file window, click Upload Browse.
3. Locate and select the file you want to upload from a network drive location or from your hard
drive.
4. Select Logo as the file type.
The file must be a 24-bit bitmap file to enable the Logo Position and Background Color section.
5. Enter the Logo position for the X and Y fields.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
.
Operating the projector
58