Development Unit Change Mechanism - Ricoh FT5233 Service Manual

12 February 1992

6.2 DEVELOPMENT UNIT CHANGE MECHANISM

[C]
[D]
[A]
The development guide rails [A] are slid back and forth by the color
development change shaft [B].
The change shafts are turned by the development change cam [C] through
the change lever [D]. The cam is driven by the main motor through gears and
timing belts. The development change solenoid [E] controls the spring clutch
to set the cam position.
[A]
[D]
[A]
[B]
[A]
2-47
DEVELOPMENT
[C]
[C]
[E]
[B]
[E]
[B]