Pre-Transfer Lamp Replacement - Ricoh FT5233 Service Manual

AROUND THE DRUM
6.9

PRE-TRANSFER LAMP REPLACEMENT

1. Remove the PTL filter assembly from the copier (see PTL Filter Cleaning
And Replacement).
2. Remove the registration clutch from the copier (see Registration Clutch
Replacement).
3. Slide out the pre-transfer lamp [A] from the copier (1 screw, 1 connector,
and 2 wire saddles).
4. Install a new pre-transfer lamp and reassemble the copier.
[A]
5-60
12 February 1992