3-6. Printing - Development
3-6-1. Development Unit
1.
Remove the upper cassette and open the
right cover.
2.
Remove plate [A] (2 screws).
3.
Take out the development unit [B] and lay
it on a flat surface covered with
newspaper.
3-6-2. Toner Metering Blade
1. Take out the development unit.
2. Remove the toner cartridge [A].
3. Remove the toner metering blade [B] (2
screws).
Cautions:
• Do not touch, bend, or damage the new
blade.
• Do not touch the development roller.
• Do not scrape the blade against the
development roller.
3-31