Ricoh FT5233 Service Manual page 91

TONER SUPPLY
Toner Supply Ratio: This ratio can be selected by following SP modes.
SP31: Black Toner Supply Ratio
(Detect Mode)
Data
Supply Ratio
Toner Supply Ratio
Parameter
SP81: Red/Blue/Green Toner
Supply Ratio (Detect Mode)
Data
Supply Ratio
Toner Supply Ratio
Parameter
ID Sensor Data (Detect Mode):The amount of toner supplied depends on
ID Sensor Level
No Toner Supply
Toner Supply 1
Toner Supply 2
Toner Supply 3
Toner End
ID Sensor Abnormal
Paper Size Data: The amount of toner supplied depends on
Paper Size A3
Paper Size
49
Parameter
Color Data: The amount of toner supplied depends on color data.
Color
Color Parameter
When select the color toner supply ratio, the color
development unit must be installed the machine.
0 1 2
15% 7.5% 30% 60%
2 1 4
0 1 2
14% 7% 21% 28%
2 1 3
the ID sensor data.
When the ID sensor data is abnormal, the
ID sensor level parameter decreases to 1/2.
Vsp/Vsg x 100 (%)
Black
0~9.9
10.0~10.4
10.5~11.9
12.0~14.9
15.0~49.9
50.0~
paper size.
A4 B4 B5
24 37 18
Black Red
24 52
3
8
3
4
ID Sensor Level Parameter
Color
0~24.9
25.0~26.9
27.0~28.9
29.0~30.9
31.0~49.9
50.0~
F4 DLT LG
29 48 42
Blue Green
40 40
2-62
12 February 1992
0
1/4
1/2
1
2
1/2
By-pass
LT
Feed
24 50