Ricoh FT5233 Service Manual page 788

12 February 1992
[G]
[E]
[B]
[F]
[G]
8. Remove the screw [A] for the connecting gear bracket [B].
9. Remove one screw [C] and loosen another screw [D] to let the gear fixing
bracket [E] rotate down.
10. Engage the paper tray driven gear [F] with the paper tray drive gear [G]
by raising the connecting gear bracket.
11. Secure the gear fixing bracket with the screws [C] and [D] on the shafts of
the paper tray drive gear and the paper tray driven gear.
12. Fix the connecting gear bracket (1 shoulder screw –M3 [F] and 1
shoulder screw –M4 [G] with rubber ring [H]).
[F]
[B]
[A]
11
[E]
[D]
[F]
[H]
[G]
INSTALLATION
[C]