Ricoh FT5233 Service Manual page 668

ORIGINAL FEED 12 February 1992
6. ORIGINAL FEED
6.1 ORIGINAL PICK-UP
[A]
[C]
[B]
[D]
After setting the originals on the original table, the originals contact the feeler
[A] of the original set sensor and cause the feeler to move out of the sensor.
The DF then sends the original set signal to the main system's CPU to inform
it that the DF will be used. When the Start key is pressed, the pick-up
solenoid [B] is energized. The original stack is then pressed between the
pick-up lever [C] and pick-up roller [D]. The rotation of the pick-up roller
advances the bottom original.
8