Ricoh FT5233 Service Manual page 335

12 February 1992
9.18.3 Duplex Tray Side Fence Adjustment
When:
Purpose:
Adjustment standard:
How:
[A]
NOTE: This adjustment is not effective for copies in single 2-sided copying
mode and overlay mode.
1. Pull the duplex tray out, and lift up the upper and lower paper guide
plates.
2. Loosen the 2 screws fixing the side fence positioning plate [A].
3. Move the side fence positioning plate to the desired position and tighten
the screws.
If side-to-side registration of the second image in
multiple 2-sided copying mode is not within the
adjustment standard.
To maintain proper side to side registration of the
second image in 2-sided copying mode.
0 ±2 mm (0 ± 0.08")
Change the duplex side fence position
perpendicular to the paper travel direction. This
will shift the paper position in a duplex tray
perpendicular to the paper travel direction.
5-105
COPY QUALITY ADJUSTMENT