Used Toner Collection (Sp83) - Ricoh FT5233 Service Manual

12 February 1992
4.5

USED TONER COLLECTION (SP83)

[A]
1. Turn off the main switch.
2. Remove the cleaning unit and set it on a large sheet of paper.
3. Remove the used toner tank cover [A] (2 screws).
4. Pour the used toner slowly onto the paper so that it does not scatter.
5. Place the paper sheet with the toner into a vinyl bag.
NOTE: Dispose of according to local regulations.
6. Reinstall the used toner tank cover.
7. Reinstall the cleaning unit.
8. While pressing both "1" and "3" on the operation panel number keys, turn
on the main switch in order to access the SP mode.
NOTE: Release the number keys after confirming that the call service
indicator and the copy counter number "0" are blinking.
9. Enter "83" using the number keys and press the enter key.
10. Enter "1" using the number keys and press the enter key.
11. Turn the main switch off.
5-33
CLEANING