Ricoh FT5233 Service Manual page 799

REPLACEMENT AND ADJUSTMENT
6.4 TRAY LIFT MOTOR REPLACEMENT
[C]
[B]
1. Remove the tray rear cover (remove 1 screw and loosen 2 screws).
= 1 tray type =
2. Remove the tray lift motor [A] (2 screws and 1 connector).
= 3 tray type =
3. Remove the paper tray from the paper tray unit (see paper tray removal).
4. Remove the tray set sensor bracket [B] (1 screw and 1 connector).
5. Pull out the paper lift motor assembly [C] from the paper tray unit (2
screws, 2 connectors, and 1 wire clamp).
6. Remove the tray lift motor [A] (2 screws).
[A]
22
12 February 1992
[A]