Ricoh FT5233 Service Manual page 770

INSTALLATION
11.2 INSTALLATION PROCEDURE
[A]
CAUTION: Unplug the copier power cord before starting the following
procedure.
•
NOTE: The sorter adapter (A328) should be installed before the sorter is
installed.
1. Remove the strips of tape [A].
2. Remove the front sorter cover [B] (2 screws) and rear sorter cover [C] (4
screws).
3. Remove the cover plates [D] with cutting pliers and the plastic cap [E].
4. Mount the sorter on the copier. Insert the two mounting studs into the
docking holes, and pass the harness [F] through the access hole.
5. Attach the sorter unit to the copier with the two thumb screws [G].
[A]
[A]
[C]
14
[E]
[D]
[F]
12 February 1992
[B]
[G]