Ricoh FT5233 Service Manual page 286

AROUND THE DRUM
[C]
7. Run the V sensor harness [A] and the drum grounding wire [B] on the
drum unit frame as shown and install the front drum cover.
NOTE: Make sure that the harnesses are correctly positioned and that
no wire is nicked or pinched by the drum front cover.
8. Reassemble the drum unit and install all the removed units in the copier.
NOTE: When reinstalling the ID/V sensor bracket, make sure that the
spurs [C] are correctly positioned as shown.
9. Perform the ID/V sensor adjustment (see ID Sensor and V Sensor
Adjustment SP54).
[A]
[B]
5-56
12 February 1992
[B]
[A]