Ricoh FT5233 Service Manual page 704

REPLACEMENT AND ADJUSTMENT
10.7 BELT DRIVE MOTOR REPLACEMENT
[D]
1. Remove the paper feed unit. (See Paper Feed Unit Removal.)
2. Remove the plastic clamp [A] (1 screw) and disconnect the 2P and the 4P
connector .
3. Remove the motor assembly [B] (3 screws and 1 E-ring).
4. Remove the gear [C] (2 Allen screws), then remove the motor [D]
(4 screws).
[A]
[C]
[B]
36
12 February 1992