Ricoh FT5233 Service Manual page 830

12 February 1992
[A]
[C]
15. Stick the staple position decal [A] on the ARDF as shown. (If there is no
ARDF, stick it on the corresponding position of the platen cover.)
16. Remove the green plastic clip [B] from the staple cartridge, and install the
cartridge in the stapler.
17. Reinstall the covers and plug in the copier.
18. Press the sorter stapler against the copier and fix its position by placing
caster stoppers [C] as shown.
19. Turn on the main switch of the copier and test the operation of the sorter
stapler.
NOTE * The copier recognizes automatically that the sorter stapler is
installed, so it is unnecessary to set SP#71.
* The stapler will not be stapling for the first 10 or so copies until
the first staple comes to the proper position from the cartridge.
INSTALLATION PROCEDURE
[B]
29