Ricoh FT5233 Service Manual page 754

REPLACEMENT AND ADJUSTMENT
7.5 LOWER EXIT ROLLER UNIT AND EXIT SENSOR
REPLACEMENT
[B]
[A]
1. Remove the sorter unit from the copier. (Perform steps 1 to 4 of Bin Drive
Belt Replacement.)
2. Open the upper safety cover [A] of the sorter and pull the upper exit roller
unit [B] up out of the guide rails as shown.
3. Remove the rear [C] rail by releasing the hooks [D] on both sides as
shown.
[C ]
18
12 February 1992
[D]
[D]