Ricoh FT5233 Service Manual page 716

REPLACEMENT AND ADJUSTMENT
"a"
"a" ≤ 10∼15 mm
10. If the paper did not stop at the correct position ("a"=10∼15 mm), turn VR
103 [A] to correct the original stop timing.
NOTE: Turning VR103 clockwise results in the original stopping later.
11. Set back DIP SW101 [B] on the main control board as follows:
ON: 101-1
OFF: 101-2,3,4
12. Reinstall the DF main control board cover [C] and the left scale.
[C]
VR 103
"a" ≥ 10∼15 mm
48
12 February 1992
[A]
[B]