Ricoh FT5233 Service Manual page 198

12 February 1992
Mode No.
User code Counter
•91
Check
User Code
•92
Counter Clear
•93
Copy Limit
SC/Jam Counter
97
Clear
98 Counter Clear
99 Memory All Clear
Function
Displays the contents of each user code
counter. use the "+" and "–" ("up" and "down")
keys to select user code. (The last two digits of
the user code are displayed in the copy
counter.)
(User counters count from 0 to 999999.
Press "#" key to display the first three digits in
the three digit indicator.
Hold down " • " key to display the final three
digits.)
Resets counters of all the user codes (SP91).
(To reset, press "1" then the "#" key).
Limits the maximum copy quantity that can be
entered.
Clears all the service call and jam counters.
(To clear, press "1" then the "#" key.
Beeper sounds 3 times when this function is
used.)
Clears the following counters:
- Operation Time (motor count only) (SP100)
- Copy/Original Counters (SP101)
- SC Counters (SP120)
- Jam Counters (SP130)
- PM Counter (SP88)
- User Code Counters (SP91)
- User Program
(To clear, press "1" then the "#" key.
Beeper sounds 4 times when this function is
used.)
Clears all counters and returns all modes to
the default setting.
(To access this mode turn on the main switch
while pressing both the "Clear Modes" and
"C/S" keys. Then enter "99" and press the "#"
key.
To clear, press "1" then the "#" key.
Beeper sounds 5 times when this function is
used.)
4-21
SERVICE PROGRAM MODE
Data
0: No
1: Yes
1 – 999
999 = default
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes