Ricoh FT5233 Service Manual page 866

12 February 1992
Component
(Symbol)
Bin/Jam
Sensor
- LED (S10)
–
Bin/Jam
Sensor
- Photo Tr.
(S11)
≥ 4.0 V
≤ 1.0 V
Paper
Sensor
(S12)
≤ 1.0 V
≥ 4.0 V
CN Condition
Main SW turns on
open "Sorter misfeed"
(stays location LED starts
Low) blinking when
Bin sort/stack or staple
140-3 mode is selected.
shorted
(stays
HIgh)
open "Sorter misfeed"
(stays indicator starts blinking.
Low)
Jam
140-4
shorted
(stays
High)
open
(stays
High)
Bin
shorted
180-4
(stays
Low)
open
(stays
High)
Jam
180-6
shorted "Sorter misfeed is
(stays displayed.
Low)
open
(stays
High)
180-5
shorted
(stays
Low)
65
ELECTRICAL COMPONENT DETECTS
Symptom
Ready condition
"Sorter misfeed"
location LED starts
blinking when sort/stack
or staple mode is
selected.
–
"Sorter misfeed"
indicator starts blinking
when copies are made
in sort/stack or staple
mode.
–
No staple operation
even though copying is
–
completed in staple
mode.
"Remove copies from
the copy tray" is
– displayed when
sort/stack or staple
mode is selected.
"Sorter misfeed"
indicator starts blinking
– when copies are made
in sort/stack or staple
mode.
"Sorter misfeed"
indicator starts blinking
when copies are made
in sort/stack or staple
mode.
"Sorter misfeed"
indicator starts blinking
and no staple operation
when copies are made
– in staple mode.
No staple operation
even though a set of
copies is at the staple
position.
–
–