Ricoh FT5233 Service Manual page 731

12 February 1992
[A]
13. Secure the sorter protective earth wire [A] (1 screw and toothed washer).
14. Connect the two connectors [B] as follows:
4P white to 4P white free
11P white to 11P white free
15. Reinstall all the covers.
16. Plug in the copier power cord.
17. While pressing both the "1" and "3" on the operation panel number keys,
turn on the main switch in order to access the SP mode.
NOTE: Release the number keys after confirming that the call service
indicator and the copy counter number "0" and blinking.
18. Enter "71" using the number keys and then press the enter key.
19. Enter "1" and then press the enter key.
20. Turn off the main switch.
[B]
13
INSTALLATION