Ricoh FT5233 Service Manual page 338

COPY QUALITY ADJUSTMENT
9.20 OVERLAP/WHITE MARGIN SELECTION IN OVERLAY
MODE (SP24)
When:
Purpose:
How:
NOTE: The normal setting is no white frame on the border line. Color and
black images may overlap by 5 mm at most because of side to side
image shift between the first and second images.
SP24: Overlay Border Erase
0: NO (No border erase)
1: YES (Border erase)
If a customer wants a white frame on the border
line when using "Black-in area" and "Color-in
area" mode. (This is applied only when the editor
is installed.)
To satisfy the customer's requirement.
SP24 change the ON number of LED blocks of
the edit erase lamp unit and the ON timing for the
first and second image in "Black-in area" and
"Color-in area" mode.
5-108
12 February 1992