Ricoh FT5233 Service Manual page 870

12 February 1992
2. (1) Remove the staple cartridge, then
check for any staples jammed in the
stapling mechanism [A]. To remove
jammed staples, spread apart the
side plates [B] and slide up the front
pressure guide plate [C].
NOTE: When installing the staple
cartridge, make sure that all
the staple sheets [D] are in
the initial position.
(2) Install the staple cartridge, then
make copies in staple mode until
the staple sheet reaches the
stapling position.
[A]
[D]
Correct
69
[B]
[C]
Incorrect
OTHERS