Table of Contents
Advertisement
Page Reduction
If you have switched this feature on and you receive a message that is longer
than the paper in the cassette, usualy the machine prints it on two pages. In
this feature the machine reduces the width and length of the received image
so that it will fit on one page. If A4 L and B5 K paper sizes are loaded and
a message of B4 L size is received, the machine will reduce the message to
a single A4 L sheet. If B4 L and A4 K sizes are loaded, A3 size messages
will be reduced and printed on B4 size paper.
Cross-reference
"Length Reduction" ⇒ See page 73.
Hint
By default this feature is turned off. Switch it on with the User Parameters (see page 203).
TSI Print
Usually the sender's TTI is printed on received messages. If the sender has
not programmed their TTI, you will not be able to identify them. However, if
you turn this feature on, the sender's RTI or CSI is printed instead so you can
find out where the message came from.
Hint
By default this feature is turned off. Switch it on with the User Parameters (see page 203).
CIL/TID Print (ISDN unit required)
Two features are provided for identification of messages received by G4
(ISDN). If turned on, this information will be printed on every page. Turn CIL
and TID on and off with the User Parameters (see page 203). The CIL (Call
Identification Line) refers to the combination of the receiver's own fax num-
ber, name, the sender's own fax number and name, the communication date,
and page number. The default setting is on. The TID refers to the name
registered by the sender in their TTI. The default setting is off.
Restriction
This feature is avairable only when receive in G4 mode.
Hint
As default CIL print is turned on. Switch it off with the User Parameters (see page
203).
74
Advertisement
Table of Contents
