Ricoh FT5233 Service Manual page 816

12 February 1992
- Jogger off conditions -
1. Under the following conditions, the jogger plate does not jog after copies
are delivered to the bins.
•
If paper is loaded in a bin by hand while the sort/stack, or
staple mode is selected.
•
If the selected paper size does not match stapling
specifications.
•
If copies of different width are delivered to the bins.
2. If paper is in a bin before the main switch is turned on, the sort/stack
mode is disabled when the sorter key is pressed.
15
JOGGER SECTION