Ricoh FT5233 Service Manual page 748

INSTALLATION
9. Reinstall all the covers.
10. Plug in the copier power cord.
11. While pressing both 1 and 3 on the operation panel number keys, turn on
the main switch in order to access the SP mode.
NOTE: Release the number keys after confirming that the call service
indicator and the copy counter number 0 are blinking.
12. Enter 71 using the number keys and then press the enter key.
13. Enter 3 using the number keys and then press the enter key.
14. Turn off the main switch.
15. Remove the left plastic cover [A] on the operation panel and install the
sorter key top and cover [B] instead.
NOTE: The sorter key top and cover are provided as an accessory for
the copier.
16. Turn on the main switch and check the sorter's operation.
[A]
12
12 February 1992
[B]