Ricoh FT5233 Service Manual page 154

12 February 1992
[B]
[C]
11. Push the development unit lock lever [A] to the right (to the lock position).
12. Move the development release lever [B] to the right and pull out the black
development unit [C] half way. Holding the toner supply unit [D] with your
right hand and the bottom of the development unit with your left hand, pull
the unit all the way out . Place the unit on a clean sheet of paper.
13. Separate the toner supply unit from the development unit (3 screws).
14. Pour one pack of black developer [E] into the development unit while
turning the development roller knob [F] counterclockwise. This will
distribute the developer inside the unit.
15. Remount the toner supply unit on the development unit.
[A]
[E]
[F]
3-7
COPIER INSTALLATION
[C]
[D]