Ricoh FT5233 Service Manual page 690

INSTALLATION
[D]
5. Mount the DF on the DF mounting bracket by aligning the holes in the DF
and the pins [A] on the mounting bracket, then slide the DF to the left as
shown.
6. Secure the DF to the DF mounting bracket [B] (4 screws with flat washer).
7. Install the lift switch actuator [C] (1 screw – M3 x 4).
8. Install the sensor actuator [D] (2 screws).
[A]
[C]
22
12 February 1992
[B]