Ricoh FT5233 Service Manual page 829

INSTALLATION PROCEDURE
[A]
[C]
11. Install the locking brackets [A] at the front and the rear to secure the
sorter stapler to the copier (1 stepped screw each).
12. Loosen the 2 screws, lift the fixing bracket [B] up against the paper tray
unit base plate and retighten the screws.
13. Remove the left plastic cover [C] on the operation panel and install the
sorter key top and cover [D] instead.
(The sorter key top and cover are provided as an accessory for the
copier.)
14. Stick the main switch decal [E] on the copier as shown.
[D]
28
12 February 1992
[A]
[B]
[E]