Ricoh FT5233 Service Manual page 728

INSTALLATION
8.2 INSTALLATION PROCEDURE
[A]
[C]
[D]
CAUTION: Unplug the copier power cord before starting the following
procedure.
•
NOTE:
1. Remove the strips of tape [D] and styroform blocks [E].
2. Remove the copy tray [F].
[E]
Do not grasp the sorter by the top cover and stay as shown
by [A]. Hold both sides of the sorter as shown by [B]. This is
to prevent anti-static brush [C] damage.
[B]
[F]
10
12 February 1992