Ricoh FT5233 Service Manual page 204

12 February 1992
Mode No.
ID-sensor
165 PWM/Output
Check
V-Sensor
166 PWM/Output
Check
ADS Gain/Output
167
Check
Function
Displays the ID sensor output in the three digit
indicator.
(When entering this mode by pressing the "#"
key, the adjusted PWM value for the ID sensor
is displayed.
Hold down the start key to display the ID
sensor output voltage.
The PWM value can be changed by using the
"+" & "–" ["up" & "down"] keys.)
Displays the V sensor output in the three digit
indicator.
(When entering this mode by pressing the "#"
key, the adjusted PWM value for the V sensor
is displayed.
Hold down the start key to display the V
sensor output voltage.
The PWM value can be changed by using the
"+" & "–" ["up" & "down"] keys.)
Displays the ADS sensor output in the three
digit counter.
(When entering this mode by pressing the "#"
key, the adjusted gain data for the ADS sensor
is displayed.
Hold down the start key to display the ADS
sensor output voltage.
Do not hold down the start key too long [about
20 sec], otherwise SC12 comes up.
Gain data can be changed by using the "+" &
"–" ["up" & "down"] keys.)
4-27
SERVICE PROGRAM MODE
Data