Ricoh FT5233 Service Manual page 702

REPLACEMENT AND ADJUSTMENT
10.5 FEED-IN CLUTCH REPLACEMENT
[D]
[C]
1. Remove the document set sensor assembly [A]. (Refer to the Document
Set Sensor Replacement.)
2. Remove the reinforcement bracket [B] (4 screws).
3. Remove the paper feed clutch stopper [C] (1 E-ring).
4. Open the harness clamp [D], then remove the paper feed clutch axis [E]
(2 E-rings and 2 bushings).
[E]
[B]
34
12 February 1992
[A]