Ricoh FT5233 Service Manual page 879

INSTALLATION
4.2 INSTALLATION PROCEDURE
CAUTION: Before installing the menu reader, make sure that the
copier is unplugged.
1. Peel the backing off the strips of double-sided adhesive tape [A] and stick
the menu reader on the ARDF [B] or platen cover [C] as shown.
2. Remove the copier rear cover [D] (remove 2 screws and loosen 2 screws).
3. Remove the cover plate [E] from the top cover using cutting pliers.
[C]
[E]
[A]
[D]
8
12 February 1992
[B]