Ricoh FT5233 Service Manual page 865

ELECTRICAL COMPONENT DETECTS
Component
(Symbol)
Bin Side
Plate H.P.
Sensor (S7)
≥ 4.0 V
≤ 1.0 V
Jogger H.P.
Sensor (S8)
≥ 4.0 V
≤ 1.0 V
Timing
Sensor (S9)
≥ 4.0 V
≤ 1.0 V
CN Condition
open "Sorter misfeed"
(stays indicator starts blinking.
High)
190-3
shorted "Please wait" indicator
(stays lights and the bin side
Low) plate drive motor turns
continuously.
open "Sorter misfeed"
(stays indicator starts blinking.
High)
shorted "Sorter misfeed"
(stays indicator starts blinking.
190-1
Low) After the front door is
opened/closed, the
indicator will turn off.
However, "SC code
(H3)" is displayed when
sort/stack or staple
mode is selected.
open "Sorter misfeed"
(stays indicator starts blinking.
High)
shorted
180-7
(stays
Low)
64
Symptom
Main SW turns on
12 February 1992
Ready condition
"Sorter misfeed"
indicator starts blinking
when copies are made
in staple mode. After the
front door is
opened/closed, the
indicator will turn off.
However, "SC code
(H7)" will be displayed
when staple mode is
selected.
The bin side plate drive
motor turns
continuously turning
when the start key is
pressed.
"Sorter misfeed"
indicator starts blinking
when copies are made
in sort/stack or staple
mode.
"Sorter misfeed"
indicator starts blinking.
"Sorter misfeed"
indicator starts blinking
or "SC code (H2)" is
displayed when copies
are made in sort/stack
or staple mode.