Ricoh FT5233 Service Manual page 790

12 February 1992
[A]
17. Reinstall all the covers.
18. While pressing both "1" and "3" on the operation panel number keys, turn
on the main switch in order to access the SP mode.
NOTE: Release the number keys after confirming that the call service
indicator and the copy counter number "0" are blinking.
19. Enter "72" using the number keys and then press the enter key.
20. Enter "1" using the number keys and then press the enter key.
21. Turn off the main switch.
22. Stick the tray decals [A] on the appropriate paper trays.
23. Turn on the main switch and check the machine operation and copy
quality.
13
INSTALLATION