Ricoh FT5233 Service Manual page 691

12 February 1992 INSTALLATION
[D] [G]
[F]
[C]
[A]
[C]
[E]
[B]
9. Remove the rear cover [A] (remove 2 screws and loosen 2 screws).
10. Swing out the main control board assembly [B] (1 screw).
11. Remove the cover plate [C] from the top cover [D] with cutting pliers.
12. Run the DF harness [E] through the bushing [F] and bracket hole [G],
then secure the bushing.
23