Ricoh FT5233 Service Manual page 158

12 February 1992
33. Load A3 (11" x 17") paper either in the 1st or the 2nd paper tray and plug
in the machine.
34. While pressing both the "1" and "3" on the operation panel number keys,
turn on the main switch in order to access the SP mode.
NOTE: Release the number keys after confirming that the call service
indicator and the copy counter number "0" are blinking.
35. Enter "65" using the number keys and then press the enter key.
(The copier starts the black developer initialization, this lasts about 5
minutes, and the beeper sounds 5 times when it is finished.)
36. Enter "66" using the number keys and press the enter key.
Press "1", then the enter key.
(The copier performs the drum initial setting and the beeper sounds 5
times.)
3-11
COPIER INSTALLATION