Ricoh FT5233 Service Manual page 849

REPLACEMENT AND ADJUSTMENT
16.10.3 Bin/Jam Sensor Adjustment
[A]
[D]
1. Turn on DIP SW 100-6 [A].
2. If LED100 [B] and LED101 [C] are on, turn VR100 [D] and VR101 [E]
clockwise until LED100 and LED101 turn off.
3. Turn VR100 and VR101 counterclockwise until LED100 and LED101
start blinking and go on turning until they are continuously on.
4. Turn off DIP SW 100-6.
[B]
[C]
[E]
48
12 February 1992