Ricoh FT5233 Service Manual page 747

12 February 1992
[A]
3. Remove the relay guide [A] (1 screw).
4. Remove the cover plates [B] with cutting pliers and the plastic cap [C].
5. Mount the sorter on the copier. (Pass the harness [D] through the access
hole [E] and insert the two mounting studs [F] into the docking holes [G]).
6. Fix the sorter to the copier with the knob screw [H] (front side only).
7. Secure the sorter protective earth wire [I] (1 screw). (A toothed washer [J]
must also be installed with the European version.)
8. Connect the three sorter connectors [K] as follows:
2P red to 2P red free
4P white to 4P white free
11P white to 11P white free
[C]
[E]
[J]
[I]
[K]
11
INSTALLATION
[G]
[B]
[D]
[F]
[H]