Ricoh FT5233 Service Manual page 163

COPIER INSTALLATION
2.3 COLOR DEVELOPMENT UNIT INSTALLATION (OPTION)
[A]
NOTE: This is a universal color development unit for red, blue, and green
developer and toner.
1. Install the appropriate color detection plate [A] on the rear bracket of the
color development unit. (The plate color corresponds to the developer
and toner color.)
2. Stick the appropriate color decal [B] on the development unit handle.
3. Separate the toner supply unit [C] from the development unit ( 3 screws).
4. Pour one bag of color developer [D] into the development unit while
turning the development roller knob [E] counterclockwise. This will
distribute the developer evenly inside the unit.
5. Remount the toner supply unit on the development unit.
NOTE: When setting the toner supply unit, be sure that the 2 plates of
the toner supply unit [F] fit in the positioning grooves.
[E]
3-16
12 February 1992
[B]
[D]
[C]
[F]