Ricoh FT5233 Service Manual page 831

SERVICE TABLES (MAIN CONTROL BOARD)
14. SERVICE TABLES (MAIN CONTROL
BOARD)
14.1 DIP SWITCHES
DIP SW 100
1 2 3 4
0 0 0
1 0 0
*
1 0 0
1
0 1 0
1 1 0
0 0 1
1 0 1
0 1 1
0 0 0 0
NOTE: *1 Confirm the setting from DIP SW100-2 to -6 before turning on
DIP SW100-1 (Start SW function).
Turn off DIP SW100-1 to stop the function.
Remarks
#1: The proof motor and turn gate solenoid turn on.
Adjustment 1: For model A053
Adjustment 2: For model A069/A073/A074
#2: The main motor turns on. The bin solenoids turn on in order and the
jogger motor drives the jogger plate (B5 lengthwise size) as each bin
solenoid turns on.
#3: The staple unit (grip assembly and stapler) movement is repeated from
the 1st to 20th bins. When there is no paper in a bin, stapling operation is
skipped for that bin.
#4: #2 and #3 are repeated together.
Combinations other than those above are used only at the factory.
0 : OFF
5 6
Proof Motor Speed Adjustment 1
0 0
(350 mm/s)
Proof Motor Speed Adjustment 2
1 0
(300 mm/s)
0 0 Sorter Free Run
0 0 Staple Free Run
0 0 Sorter & Staple Free Run
0 0 Lowers Staple Unit (To 6th Bin)
0 0 Lowers Staple Unit (To 20th Bin)
0 0 Opens Bin Side Plate
0 1 Bin/Jam Sensor Adjustment
1 : ON
Function
30
12 February 1992
Remarks
#1
#1
#2
#3
#4