12 February 1992
6.
PAPER PATH
6.1
NORMAL COPYING
[E]
Paper feed begins from the LCT or paper tray unit paper feed stations. The
copy paper then follows one of two paths inside the copier. The path followed
depends on which mode the operator has selected. For copy processing, all
sheets follow the same path from the paper feed mechanism [A] through the
registration [B], T & S corona [C], and fusing unit [D]. After that, normal
copies are delivered to the copy tray [E], however, 2 sided copies and
overlay copies are diverted for further processing.
[C]
[D]
1-13
PAPER PATH
[B]
[A]
[A]