Ricoh FT5233 Service Manual page 773

12 February 1992
12. REPLACEMENT AND ADJUSTMENT
12.1 EXIT ROLLER AND O-RING REPLACEMENT
[B]
[D]
1. Remove the sorter from the copier.
2. Remove the front and rear covers (2 screws each).
3. Remove the ground wire [A] of the upper guide plate [B] (1 screw).
4. Swing the guide plate up, then remove it by carefully pulling it up.
5. Remove the inner cover [C] (4 screws).
6. Unhook the front [D] and rear [E] pressure springs.
REPLACEMENT AND ADJUSTMENT
[A]
[E] [B]
17
[C]