Ricoh FT5233 Service Manual page 821

STAPLE UNIT
- Staple prohibit conditions -
1. Under the following conditions, the staple mode is prohibited when the
staple key on the operation panel is pressed.
•
If paper is in a bin before the main switch is turned on.
•
If the selected paper size does not match stapling
specifications.
2. Under the following conditions, the staple mode is canceled.
•
If paper is loaded in a bin by hand while the staple mode is
selected.
•
If only one sheet is delivered to the bin.
•
If the number of sheets stapled exceeds the staple capacity.
3. Under the following conditions, the manual stapling mode in sort mode is
prohibited.
•
If paper is loaded in a bin by hand while the sort mode is
selected.
•
If the paper size in the bin does not match stapling
specifications.
•
If only one sheet is delivered to the bin.
•
If copies of different width are delivered to the bin.
•
If copies already stapled are left in the bin.
20
12 February 1992