Ricoh FT5233 Service Manual page 729

12 February 1992
[D]
[A]
[B]
3. Remove the plastic cap [A] and cover plate [B] from the left cover with
cutting pliers as shown.
4. Remove the left small cover [C] (2 screws) and rear cover [D]
(remove 2 screws and loosen 2 screws).
5. Remove the portion [E] of the left small cover with cutting pliers and
reinstall the rest of the left small cover (1 screw).
6. Install the magnet catch [F] on the exit cover (2 screws).
7. Open the exit cover [G] and hook the exit cover spring [H] and close the
exit cover (duplex machine only).
8. Install the sorter holder bracket [I] (3 screws) so that the two holes [J] on
the bracket align with the holes [K] on the copier frame as shown.
[C]
[E]
[J]
[G]
[H]
[F]
[I]
11
INSTALLATION
[K]