5-2-2 Scanner Unit
1. Remove the top cover (see section 5-1-1).
2. Remove the operation panel (see section 5-1-3).
3. Remove the scanner guide plate– two screws (see section 5-2-1 step 3).
4. Remove the R1 roller – one E-ring and one bushing (see section 5-2-1 step 4).
5. Remove the R2 roller in the same way as the R1 roller.
6. Disconnect the LED array (CN11) and the SBU (CN7) from the FCU.
7. Remove the four screws that hold the scanner unit to the base.
5-5