INSTALLATION
6.2 INSTALLATION PROCEDURE
[A]
[A]
CAUTION: Unplug the copier power cord before starting the following
procedure.
•
NOTE:
Keep the shipping retainers after installing the machine. They will
be reused if in the future the machine is transported to an another
location.
•
Proper reinstallation of the shipping retainers is required in order
to avoid any transport damage.
•
The sorter adapter (A328) should be installed before the sorter is
installed
1. Remove the strips of tape [A].
2. Open the sorter top cover [B], and remove the side covers [C] (2 screws
each). Remove the shipping retainers [D] (2 screws each).
[A]
[D]
10
12 February 1992
[B]
[C]