Ricoh FT5233 Service Manual page 218

12 February 1992
Sorter Stapler (A366)
Transport, Distribution, and
Exit Rollers
Bins
Bin/Jam, Paper Sensors
Bushings
Gears
Worm gears
Diagonal Transport Rollers
Diagonal Transport Stopper
Staple Unit Guide Rod, Pad
The location of the parts which should be lubricated at PM, are shown in the
following figures:
Note1: Paper feed Section
(1)Separation Roller Slip Clutch
Clean the slip clutch [A].
Then, lubricate the inner surface
of the spring [B] and the three
grease holes [C] of the hub [D]
with Mobil Temp. 78 every 80K.
(2)Friction Pad Assembly
Replace the friction pad
assembly [E] every 80k.
Then, lubricate the pad holder
with ALBANIA 2 grease as
shown.
PREVENTIVE MAINTENANCE SCHEDULE
EM 320K
C Damp cloth
C Damp cloth
C Blower brush
Launa oil or equivalent; if
L
bushings generate noise.
Grease-501; if gears generate
L
noise.
Heat resisting grease MT-78; if
L
worm gears generate noise.
C Damp cloth
C Alcohol
L Launa oil
[E]
4-41
NOTE
[B]
[A]
[C]
[D]